05/04
14
cable law or statute in their country of purchase.
Proof of date of purchase may be required when making a claim under warranty. In the
event that the Buyer is unable to provide adequate proof of purchase the date of warranty
will apply from date of shipment from the Distributor to the Reseller.
NOTE We request that you attach your sales docket or invoice to this manual to enable
you to establish the date of purchase in the unlikely event of a service call being made.
In-warranty service During the warranty period, if the product appears as though it may
be defective, call our toll free service before removal of the unit. A Merlin technician will
diagnose the problem, or provide you with shipping instructions for a factory repair or
replacement. If an Authorised Installer installed your unit you must call them for prompt on-
site service.
After warranty Need help after the warranty period? Need help obtaining parts, service
and accessories? See your yellow pages or phone Merlin toll free.
Specifications
Receiver type Super heterodyne, SAW filtered,
433.92 MHz, FM – FSK
Compliance C-tick and CE
Input voltage 12–24 V ac /dc +/- 10%
Power consumption 100 mA
IP rating IP33, for indoor use only
Dimensions 105 x 90 x 60h
Weight 350 grams
Input types Merlin high security code hopping wireless
device, 4 channels:
2 x Wiegand data, 26 or 30 bit (no settings
required); 37 bit using optional MW30 con-
verter
2 x PB (wired push button, Normally Open)
No of output channels 2
Output type relay contacts, timed from 1-180 sec, or
toggling
Output assignment each relay assignable to any wireless chan-
nel or card reader; restricted assignment for
some users
Max switching load 5A at 30 V dc
Number of users 2000 in any combination of wireless or wired
devices
Password protection 6-key sequence of four buttons
Power out to reader 9v dc
To Next Page
Loading...
