What to do if I see arcing inside a tube in my Mesa/Boogie CALIFORNIA TWEED 6V6 4:Forty Amplifier?
If you observe severe arcing inside a tube of your Mesa/Boogie Amplifier, immediately turn the amp to STANDBY and replace the tube and the fuse with the correct slo-blo type. This is likely due to a physical breakdown inside the tube.
How do I identify a noisy power tube in my Mesa/Boogie CALIFORNIA TWEED 6V6 4:Forty?
To identify a noisy power tube in your Mesa/Boogie Amplifier, put the amplifier on Standby, remove the tube from its socket, and turn the amp back on.
What to do if I find a problematic tube during diagnostic of my Mesa/Boogie CALIFORNIA TWEED 6V6 4:Forty?
If you are having problems with a tube during a diagnostic of your Mesa/Boogie Amplifier, try substituting the suspect tube with a new one.
What to do if the driver tube is crackling in my Mesa/Boogie Amplifier?
If the driver tube in your Mesa/Boogie Amplifier is crackling or humming in all modes, try replacing it.
How to identify tube noise caused by contamination in Mesa/Boogie CALIFORNIA TWEED 6V6 4:Forty Amplifier?
To identify tube noise caused by contamination within a tube in your Mesa/Boogie Amplifier, lightly tap on the glass to hear the noise change. This can help you isolate the problematic tube.
How to troubleshoot minor pre-amp tube noise in Mesa/Boogie CALIFORNIA TWEED 6V6 4:Forty Amplifier?
To address minor pre-amp tube noise in your Mesa/Boogie Amplifier, try swapping the tubes.
General| Type | Tube Amplifier |
|---|---|
| Power Output | 40 Watts |
| Preamp Tubes | 5x 12AX7 |
| Speaker | 1x 12" |
| Effects Loop | Yes |
| Channels | 2 |
| EQ | Bass, Mid, Treble |
| Speaker (Specific) | Celestion Creamback |
| Speaker (Alternative) | 1x12" Celestion A-Type |
Detailed explanation of each control on the front of the amplifier for tone shaping and operation.
Explanation of the power selection and standby switch functions for optimal tube life and performance.
Description of rear panel jacks, fuse, and connectivity options for external devices.
Explains speaker impedance, matching, and basic wiring principles for optimal amplifier loading.
Covers series, parallel, and combined wiring configurations for connecting multiple speaker cabinets.
To Next Page