Below for your reference are some common and correct SPEAKER Output Connection Examples;
• One 8 Ohm Cabinet – To 8 Ohm SPEAKER Output (One MESA 8 Ohm Cabinet).
• Two 8 Ohm Cabinets – Each to a separate 4 Ohm SPEAKER Output or… One Cabinet to PARALLEL Input on MESA Speaker
Cabinet and 2nd Cabinet to other PARALLEL jack On MESA Cabinet.
• One 4 Ohm Cabinet – To 4 Ohm speaker output. (Any 4 Ohm Cabinet)
• Two 4 Ohm Cabinets – NOT RECOMMENDED! Output Transformer NOT setup to run on 2 Ohm Load.
• One 16 Ohm Cabinet – To 8 Ohm SPEAKER Output. (Slight reduction in maximum power)
• Two 16 Ohm Cabinets – Use Parallel box or “Y” connector to 8 Ohm SPEAKER Output.
These common Cabinet connection scenarios will cover most of the widely used setups you will run into. There are likely others less
common that we have not identified here, and some may also be safe and unique sounding. Feel free to call us if you are concerned
as it is always better to be safe than sorry when it comes to ensuring proper loading of an expensive amplifier/piece of equipment
like the California Tweed. Our Product Specialists will be happy to guide you and/or get you the proper information regarding this
important topic.
That’s it for the Features, Controls and Interfacing of the California Tweed. We hope this Manual and Operating Guide helps you
get the very best performance from your new amplifier. Here’s wishing you many years of amazing Tone and inspiration from the
California Tweed and hopefully it will reward you many times over for your initial investment and help you take your playing and musi-
cal endeavors to exciting new heights.
From all of us here at MESA/Boogie, Cheers and Enjoy!
PAGE 13
REST AREA
To Next Page
Loading...
