Meta System DEFCOM 3.1B User Manual

12
DEFCOM 3.1B User Manual
It is possible to set some alarm functions to adapt the alarm system to the motorcycle and
its driver’s needs. All possible set-up are described in the table below where in bold are hi-
ghlighted the factory set-up.
12. MAIN PROGRAMMABLE FUNCTIONS
FUNCTION OPTION “A” OPTION “B”
Passive arming Enabled Disabled
Passive arming type Only immobilizer
Immobilizer and
switches alarm
Immobilizer,
switches alarm
and tilt sensor
Horn alarm output Continuous Alternated
Buzzer Arm./Dis. Enabled Disabled
Direction indicators
Arm./Dis.
Enabled Disabled
Alarm line
Yellow/Green wire
Active if removed the
earth connection
Active with
earth connection
Alarm line
Purple wire
Active if removed
the earth connection
Active with
earth connection
Arm./Dis. switch
input using CARD
Remote control
buttons
Button “A”:
Arming/Disarming
Button “A”: Arming
Button “B”: Disarming
Panic alarm Enabled Disabled
Override Code length Only  rst 3 digits 5 digits
Type of low
consumption mode
Stop Mode Deep Sleep Mode
Activation timing of
low consumption
mode
5 days 10 days
Use only the PRG007 PROGRAMMER V3 to select the various functions of the product. Sof-
tware updates for the PRG007 PROGRAMMER V3 and information about the programmable
functions are available ONLINE in the TECH AREA/VEHICLES AREA of the www.metasystem.it
website.
To enable or disable the buzzer during the alarm Arming/Disarming execute the
following procedure:
• Enable the SERVICE MODE and after press 6 time the A BUTTON of remote con-
trol, one Beep will con rm the buzzer change.
• Then restore the normal operation of the alarm unit by deactivating the SER-
VICE MODE.

Meta System DEFCOM 3.1B Specifications

General

Brand	Meta System
Model	DEFCOM 3.1B
Category	Security System
Language	English