To Next PageTo Next Page
Need help?Do you have a question about the Metabo HPT CN 16SA and is the answer not in the manual?
Read and understand safety precautions, warnings, and operating instructions before use.
Explains the meaning of WARNING, CAUTION, and NOTE signal words for hazard identification.
Covers essential safety rules for work area, electrical safety, and personal safety during operation.
Details specific safety rules and symbols, including PPE, tool handling, and guard usage.
Explains the double insulation design for enhanced electrical safety during use.
Identifies and illustrates the key components of the power tool.
Lists technical specifications such as motor type, power source, current, and cutting capacity.
Describes the intended uses of the nibbler, including cutting various metal plates.
Outlines essential checks before operating the tool, including power source, switch, and environment.
Provides instructions on cutting plates, including proper technique and handling.
Details the procedure for replacing the punch and die, including service life considerations.
Advises on regular checks and replacement of the punch and die for efficiency.
Emphasizes the importance of regularly checking and tightening all screws for safe operation.
Guides on caring for the motor unit, protecting it from damage and moisture.
Explains how to inspect and replace worn carbon brushes to prevent motor damage.
Lists the standard accessories included with the tool, such as Allen wrenches.
Read and understand safety precautions, warnings, and operating instructions before use.
Explains the meaning of WARNING, CAUTION, and NOTE signal words for hazard identification.
Covers essential safety rules for work area, electrical safety, and personal safety during operation.
Details specific safety rules and symbols, including PPE, tool handling, and guard usage.
Explains the double insulation design for enhanced electrical safety during use.
Identifies and illustrates the key components of the power tool.
Lists technical specifications such as motor type, power source, current, and cutting capacity.
Describes the intended uses of the nibbler, including cutting various metal plates.
Outlines essential checks before operating the tool, including power source, switch, and environment.
Provides instructions on cutting plates, including proper technique and handling.
Details the procedure for replacing the punch and die, including service life considerations.
Advises on regular checks and replacement of the punch and die for efficiency.
Emphasizes the importance of regularly checking and tightening all screws for safe operation.
Guides on caring for the motor unit, protecting it from damage and moisture.
Explains how to inspect and replace worn carbon brushes to prevent motor damage.
Lists the standard accessories included with the tool, such as Allen wrenches.
General| Brand | Metabo HPT |
|---|---|
| Model | CN 16SA |
| Category | Power Tool |
| Language | English |
