Metabo CS 23-355 Original Instructions

ENGLISHen
16
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. Depending on the operating
conditions, the condition of the power tool or the
accessories, the actual load may be higher or lower.
For assessment purposes, please allow for breaks
and periods when the load is lower. Based on the
adjusted estimates, arrange protective measures
for the user e.g. organisational measures.
Vibration total value
(vector sum of three directions)
determined in accordance with EN 62841:
a
hw
= Vibration emission value
K
hw
= Uncertainty (vibration)
Typical A-effective perceived sound levels
:
L
pA
= Sound-pressure level
L
WA
=Acoustic power level
K
pA
, K
WA
= Uncertainty
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!

Metabo CS 23-355 Specifications

General

Input power	2300 W
Cable length	2.7 m
AC input voltage	220-240 V
AC input frequency	50 - 60 Hz
Noise level	104 dB
Idle speed (max)	4000 RPM
Diamond disc	-
Saw blade included	Yes
Suitable for materials	Metal

Weight and Dimensions

Depth	282 mm
Width	468 mm
Weight	16900 g
Blade diameter	- mm