To Next PageTo Next Page
Need help?Do you have a question about the Metabo UK 290 and is the answer not in the manual?
General| Input power | 1800 W |
|---|---|
| Output power | 1200 W |
| Cutting depth (45º) | 42 mm |
| Cutting depth (90º) | 60 mm |
Weight and Dimensions| Depth | 478 mm |
|---|---|
| Width | 674 mm |
| Height | 878 mm |
| Weight | 25000 g |
Identifies and describes the various controls and features for operating the machine.
Lists the tools provided or required for machine operation and maintenance.
Refers to accompanying documents such as operating instructions and spare parts lists.
Defines the intended use and limitations of the circular saw, specifying suitable materials and applications.
Provides essential safety guidelines and precautions to prevent personal injury or material damage during operation.
Explains the meaning of various symbols displayed on the machine to ensure safe operation.
Details the safety devices integrated into the machine and their function.
Highlights risks associated with electric shock and necessary precautions.
Warns about the dangers of crushing or injury from moving machine parts.
Details risks during cutting operations, including kickback and blade hazards.
Covers risks from inhaled wood dust and operational noise, requiring protective gear.
Highlights unique design aspects and capabilities of the circular saw.
Details the function of the ON/OFF switch and other controls.
Describes the safety functions of the blade guard and the use of the push stick.
Instructions for using the machine in circular saw mode for trimming and long cuts.
Guidance for crosscut saw mode, suitable for crosscuts and precision cuts.
Step-by-step guide for safely replacing the saw blade, including precautions.
Procedure for accurately adjusting the machine's scales for precise measurements.
Instructions for setting and adjusting the blade tilt limiter for bevel cuts.
Guidance on cleaning the machine, including the chipcase and dust extraction ports.
Advises on safe storage practices to prevent unauthorized use or accidents.
Details the steps for safely preparing and transporting the machine.
Addresses problems like the motor not running due to undervoltage or power failure.
Solutions for reduced motor performance, possibly due to low voltage or blunt blades.
Guidance on issues affecting cutting performance, such as a blunt saw blade.
Troubleshooting steps for blocked chip ejection tubes and insufficient dust collection.
