To Next PageTo Next Page
Need help?Do you have a question about the Metabo UK 333 and is the answer not in the manual?
Identifies and explains the machine's operational controls and interfaces.
Lists the tools required or supplied with the machine for operation.
Defines the intended applications and limitations for the circular saw.
Provides overarching safety guidelines to prevent injury and damage.
Covers risks of injury from moving components, kickback, and blade contact.
Emphasizes PPE and risks associated with wood dust inhalation.
Warns against unauthorized modifications and highlights risks from machine defects.
Addresses risks from noise exposure and clearing blocked workpieces.
Explains the function and operation of the machine's power controls.
Details how to adjust the motor speed for different materials.
Describes the mechanism for crosscut operation and blade movement.
Explains how to engage or disengage the pull bar for crosscut mode.
Details the function of the handwheel for adjusting blade depth.
Describes how to adjust the saw blade's tilt angle.
Explains how to secure the set blade tilt angle.
Details the mechanism for limiting or extending the blade tilt range.
Explains the use and adjustment of the universal fence for ripping and mitre cuts.
Guides on unpacking, setting up, and preparing the machine for use.
Details the steps for assembling the machine components, including safety devices.
Instructions for operating the machine in circular saw mode.
Instructions for operating the machine in crosscut saw mode.
Step-by-step guide for safely replacing the saw blade.
How to check and readjust scales for accuracy after use.
Procedure for setting the blade tilt limits to 0° and 45°.
How to adjust the carriage return for smooth operation.
Steps for cleaning the saw, including the chipcase.
How to inspect and replace worn motor carbon brushes.
Guidelines for safely storing the machine when not in use.
Routine maintenance checks and procedures for the machine.
Identifies and explains the machine's operational controls and interfaces.
Lists the tools required or supplied with the machine for operation.
Defines the intended applications and limitations for the circular saw.
Provides overarching safety guidelines to prevent injury and damage.
Covers risks of injury from moving components, kickback, and blade contact.
Emphasizes PPE and risks associated with wood dust inhalation.
Warns against unauthorized modifications and highlights risks from machine defects.
Addresses risks from noise exposure and clearing blocked workpieces.
Explains the function and operation of the machine's power controls.
Details how to adjust the motor speed for different materials.
Describes the mechanism for crosscut operation and blade movement.
Explains how to engage or disengage the pull bar for crosscut mode.
Details the function of the handwheel for adjusting blade depth.
Describes how to adjust the saw blade's tilt angle.
Explains how to secure the set blade tilt angle.
Details the mechanism for limiting or extending the blade tilt range.
Explains the use and adjustment of the universal fence for ripping and mitre cuts.
Guides on unpacking, setting up, and preparing the machine for use.
Details the steps for assembling the machine components, including safety devices.
Instructions for operating the machine in circular saw mode.
Instructions for operating the machine in crosscut saw mode.
Step-by-step guide for safely replacing the saw blade.
How to check and readjust scales for accuracy after use.
Procedure for setting the blade tilt limits to 0° and 45°.
How to adjust the carriage return for smooth operation.
Steps for cleaning the saw, including the chipcase.
How to inspect and replace worn motor carbon brushes.
Guidelines for safely storing the machine when not in use.
Routine maintenance checks and procedures for the machine.
General| Input power | 2200 W |
|---|---|
| Output power | 1500 W |
| Power source | AC |
| Blade bore | 30 mm |
| Blade diameter | 220 mm |
| Idle speed (max) | 4500 RPM |
| Double insulated | Yes |
| Dust extraction port | - |
Weight and Dimensions| Depth | 760 mm |
|---|---|
| Width | 585 mm |
| Height | 900 mm |
| Weight | 35900 g |
