Metasys UNT Series - Ordering Information

UNT Controller—Unitary Controller (UNT) 71
Ordering Information
Tables 28 - 31 list code numbers and descriptions for the UNTs and
accessory equipment.
Table 28: UNT Controllers and Accessory Equipment
Code Number Description
AS-UNT110-1
UNT with eight binary outputs, N2 Isolation,
and triac--high or low side selectable
AS-UNT111-1
UNT with six binary outputs, two analog
outputs, N2 Isolation, and triac--high or low
side selectable
AS-UNT120-1
UNT110 controller with heater (for low
temperature use)
AS-UNT121-1
UNT111 controller with heater (for low
temperature use)
AS-UNT140-1
UNT110 controller with screw terminals for
field terminations and spare 6-pin Zone Bus
phone jack
AS-UNT141-1
UNT111 controller with screw terminals for
field terminations and spare 6-pin Zone Bus
phone jack
AS-UNT110-101
UNT110 mounted in EN-EWC10-0
enclosure with 50 VA transformer
AS-UNT111-101
UNT111 mounted in EN-EWC10-0
enclosure with 50 VA transformer
AS-UNT140-101
UNT140 mounted in EN-EWC10-0
enclosure with 50 VA transformer
AS-UNT141-101
UNT141 mounted in EN-EWC10-0
enclosure with 50 VA transformer
Johnson
Controls Code
Numbers
Controllers