2
OPERATION
2. OPERATION
Please read all instructions before operating the TEROS 12 to ensure it performs to its full
potential.
SAFETY PRECAUTIONS
METER sensors are built to the highest standards. Misuse, improper protection, or improper
installation may damage the sensor and possibly void the manufacturer’s warranty. Before
integrating the TEROS 12 into a system, follow the recommended installation instructions
and have the proper protections in place to safeguard sensors from damage. If installing
sensors in a lightning-prone area with a grounded data logger, see the application note
Lightning surge and grounding practices.
2.1 INSTALLATION
Follow the steps listed in Table 1 to set up the TEROS 12 and start collecting data. For more
detailed installation information consult the TEROS Sensors Best Practices Installation Guide.
Table 1 Installation
Tools Needed
Auger or Shovel
Secure Mounting Location for Data Logger and Cable
Optional Tool
Borehole Installation Tool
jack
cradle
carriage
shaft
actuator
flashlight
TEROS
sensor
To Next Page
Loading...
