To lock and to release the keyboard
• Keep UP and DOWN pressed for more than 3 seconds.
• The ”oFF” message will be displayed and the keyboard will be locked. If any key is pressed more that
3 s. the ”oFF” message will be displayed.
• To release the keyboard, keep UP an DOWN keys pressed till message ”ON” is displayed.
How to see the set temperature
• Push an release the SET key, the set value will be showed.
• Push and release SET, or wait for 5 s. to return to the normal visualization.
How to change the set point
• Push the SET key for more than 2 seconds to change the set point value.
• The value of the set point will be displayed and the ”°C” or ”F” led starts blinking.
• To change the value, push Up or DOWN arrow within 10 s.
• To memorize the new value, push the SET again or wait for 10 seconds.
How to start a manual defrost
• Push DEFROST key for more than 2 seconds and a manual defrost will start.
|
23
28.1.2020 Rev. 9.0
METOS PROFF / CLASSIC
To Next Page
Loading...
