Metra Electronics 95-5600 - Stacked ISO Units Provision

5
Dash Disassembly 95-5600
(Figure A)
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Slide the aftermarket radio (and digital
sound processor, equalizer, etc.) into
the trim bezel. Align the holes in the
mounted ISO brackets with the holes in
the units and secure with the screws
included with the units. Snap the
ISO stack trimplate to the face of the
assembly. (Figure A)
4. Reassemble dash in reverse order
of disassembly.
Stacked ISO units provision