Metra Electronics 95-6511 - Dodge Journey Dash Disassembly; Disconnect Battery; Remove Radio Trim Panel with A;C Controls; Remove Radio

95-6511 DASH DISASSEMBLY
DODGE JOURNEY 2009-10
A
12
3
4
5
6 AUX
AUX
SET
VOLUME
PUSH ON
PUSH AUDIO/SELECT
AM
FM
DISC
LIST
MUSIC
TYPE
SEL;ECT
TUNE/SCROLL
SEEKSEEK
SCAN
TIME INFO RW FF
U
POWER
OUTLET
12
3
4
5
6 AUX
AUX
SET
VOLUME
PUSH ON
PUSH AUDIO/SELECT
AM
FM
DISC
LIST
MUSIC
TYPE
SEL;ECT
TUNE/SCROLL
PUSH
PUSH
OFF
PUSH
OUTLET
POWER
OUTLET
B
C
9
1
Remove (4) 7MM screws securing
radio to dash to remove. ( Figure B)
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
3
NOTE: The top of the metal bracket in
the sub dash will need to be cut to
allow for the clearance of the Double
DIN radio’s chassis. (
Figure C)
Unclip and remove the entire factory
radio trim panel including the a/c
controls. (
Figure A)
TIP: Open the compartment door at the
top of the radio trim panel.
2
Continue to kit assembly.