Metra Electronics 95-7333 - Kit Assembly; Double DIN and Stacked ISO Mount Assembly

3
95-7333 KIT ASSEMBLY
B
A
DOUBLE DIN/STACKED ISO MOUNT
UNITS PROVISION
Slide the Double DIN or stacked ISO
mount unit(s) into the bracket/trim
plate assembly and secure the
unit(s) to the assembly using the
screws supplied with the unit(s).
(Figure B)
2
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Snap the Double DIN brackets to the
inside edge of the Double DIN trim
plate. (Figure A)
1