Metra Electronics 99-7424 User Manual

4
99-7424 KIT ASSEMBLY
A
B
ISO MOUNT RADIO PROVISION WITH POCKET
Mount the ISO Brackets to the radio
using the screws supplied with the
radio.
(Figure A)
1
Slide the radio into the radio housing
until it snaps into place.
(Figure B)
2
Snap the Trim plate onto the front of
the Radio Housing.
(Figure B)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.

Metra Electronics 99-7424 Specifications

General

Brand	Metra Electronics
Model	99-7424
Category	Automobile Accessories
Language	English