Metra Electronics 99-7502 - Kit Assembly - ISO Mount; Mount ISO Brackets to Radio; Install Radio and Trim Plate

99-7502 KIT ASSEMBLY
3
B
ISO DIN MOUNT RADIO PROVISION
2
Slide the radio into the radio housing
until it snaps into place. (Figure B)
3 Snap the Trim plate onto the front of
the Radio Housing assembly.
(Figure B)
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
Mount the ISO Brackets to the radio
using the screws supplied with the
radio. (Figure A)
1
A