2
99-8219
KIT ASSEMBLY
Slide the aftermarket radio into the
cage and secure.
(Figure C)
3
Slide the housing brackets onto
the side of the radio housing until
the clips engage.
Note: Brackets
are marked left and right.
(Figure A)
1
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward.
(Figure B)
2
DIN RADIO PROVISION WITH POCKET
A
B
C
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.
To Next Page
Loading...
