Metra Electronics BT-HD01

To Next Page

METRA. The World’s best kits.

™

metraonline.com

REV. 2/9/2016 INSTBT-HD01

Installation instructions for part BT-HD01

CAUTION!

All accessories and switches must be connected before

cycling the ignition. Also, do not remove the factory radio with the key

in the on position, or while the vehicle is running.

• Adds Bluetooth audio streaming to the factory radio

• Can be operated with the handlebar controls

• Will play/pause with ignition on/off

• Will show up on the factory radio as HDBT

• BT-HD01 interface • BT-HD01 harness • 4’ Waterproof USB cable

FEATURES

INTERFACE COMPONENTS

• Wire cutter • Crimp tool • Solder gun • Tape • Torx driver

• Connectors (example: butt-connectors, bell caps, etc.)

TOOLS REQUIRED

BT-HD01

Harley Davidson

Bluetooth Audio

Streaming Interface 2006-2013

Table of Contents

Pre-Installation ....................................................... 2

Fairing Disassembly ........................................... 3-4

Connections to be made .........................................5

Installing the BT-HD01 ............................................6

Pairing the BT-HD01 ...............................................6

Operation.................................................................6

APPLICATIONS

HARLEY DAVIDSON (with Advanced Radio)

Electra Glide 2006-2013

Street Glide 2006-2013

Road Glide 2006-2013

Main Page

Need help?

Do you have a question about the Metra Electronics BT-HD01 and is the answer not in the manual?

Summary

Pre-Installation

Software Version Check

Verify the motorcycle's radio software version is V8.250 or higher.

Fairing Disassembly

FLH;Batwing Models

Step-by-step guide for removing the fairing on FLH/Batwing models.

Roadglide;Sharknose Models

Step-by-step guide for removing the fairing on Roadglide/Sharknose models.

Wiring Connections

BT-HD01 Harness Integration

Connect the BT-HD01 harness to the factory radio and vehicle connectors.

Installation and Operation

Installing the BT-HD01

Physically attach the BT-HD01 interface unit to the radio.

Pairing the BT-HD01

Connect and pair a Bluetooth device with the BT-HD01 for audio streaming.

Operation

Utilize handlebar and radio controls for music playback and source selection.