Metra Electronics BUICK Lacrosse 2005-2009 User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-2021
99-2021
APPLICATIONS
BUICK Lacrosse
2005-2009
KIT FEATURES
• DIN Radio Provision with Pocket
• ISO Mount Radio Provision with Pocket
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets
• E) Double DIN Trim Plate • F) Pocket
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Phillips Screwdriver • Socket Set
B
D
E
C
F
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wire harness:
• GMOS-01 GM interface 2002-up
• GMOS-04 GM amplified interface 2002-up
Antenna adapter:
• 40-GM10 -GM antenna adapter 1988-up

Metra Electronics BUICK Lacrosse 2005-2009 Specifications

General

Brand	Metra Electronics
Model	BUICK Lacrosse 2005-2009
Category	Car Receiver
Language	English

Summary

DASH DISASSEMBLY

Disconnect Battery Terminal

Disconnect the negative battery terminal to prevent an accidental short circuit.

Remove Lower Trim Panel

Unclip and remove the trim panel located below the A/C control.

Remove Climate Controls

Remove screws securing climate controls and unplug/remove them.

Remove Upper Trim Panel

Unclip and remove the trim panel situated above the radio.

Remove Radio

FINAL ASSEMBLY

Locate and Connect Harness

Locate factory wiring harness, use adapter, and make connections as shown.

Reconnect Battery and Test

Reconnect the negative battery terminal and test the unit for proper operation.

Reassemble Dash

Final Wiring Connections