Metra Electronics 99-2003 User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-2003
1-800-221-0932
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
Phillips Screwdriver • Utility Knife • Socket Wrench
KIT FEATURES
APPLICATIONS
GM/SUZUKI MULTI KIT
• DIN Head Unit Provisions with Pocket
• ISO DIN Head Unit Provisions with Pocket
• Double DIN head unit provision
• Stacked ISO head unit provision
A) Radio Housing w/ Pocket • B) ISO Trim Plate • C) DDIN Trimplate • D) DDIN Stacked ISO Brackets
E) DIN Spacer • F) ISO Snap In Brackets • G) Carriage Bolts • H) Kep Nuts • I) (3) Screws/(3) Speed Clips
KIT COMPONENTS
TOOLS REQUIRED:
C
99-2003
D
E
F
G
I
A
H
WIRING AND ANTENNA CONNECTIONS
(Sold Separately)
• Wiring Harness - Please see www.metraonline.com
for specific interface applications
• Antenna
Adapter -
• 40-GM10 - GM Antenna Adapter 1988-up
• 40-CR10 - Chrysler Antenna Adapter 2002-up
B

Metra Electronics 99-2003 Specifications

General

Type	Installation Kit
Color	Black
Material	Plastic
DIN Compatibility	Single DIN
ISO Compatibility	Yes
Brand	Metra Electronics
Model	99-2003
Category	Car Receiver
Function	Allows for the installation of an aftermarket radio

Summary

Kit Overview and Applications

Kit Features and Components

Overview of the kit's capabilities, provisions, and included parts.

Vehicle Applications List

Comprehensive list of vehicle makes and models compatible with the 99-2003 Multi Kit.

Dash Disassembly Procedures

Buick Dash Disassembly (Century/Regal)

Dash panel removal steps for Buick Century (1997-04) and Regal (1997-04).

Buick Dash Disassembly (LeSabre/Park Ave)

Dash panel removal steps for Buick LeSabre (1995-99) and Park Ave (1995-99).

Chevrolet/GMC Dash Disassembly (Blazer/S-10)

Dash panel removal steps for Chevrolet Blazer (2002-04) and S-10 (2002-04).

Pontiac Dash Disassembly (Aztec/Bonneville)

Dash panel removal steps for Pontiac Aztec (2001-08) and Bonneville (2000-04).

Tab Instructions

Using a Utility Knife for Tab Modifications

Guidance on using a utility knife to modify mounting tabs based on vehicle type.

Kit Assembly Procedures

DIN Head Unit Installation

Steps for installing a single DIN head unit into the provided housing.

Double DIN Head Unit Installation

Steps for installing a double DIN head unit using the trimplate and brackets.

Two ISO Radios Installation

Steps for installing two ISO radios using brackets and the trimplate.

Final Assembly and Wiring

Wiring Harness Connections

Instructions for connecting the factory wiring harness to the new head unit.

Reassembly and Testing

Guidance on reassembling the vehicle dash and testing the installed unit.