REV. 2/27/2017 INST99-6527B
INSTALLATION INSTRUCTIONS FOR PART 99-6527B
METRA – The World’s best kits.
®
metraonline.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
•
Touchscreen display for climate and personalization features
•
Painted black
• A) Radio trim panel with touchscreen display • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench • Torx T-20 screwdriver
TOOLS REQUIRED
Ram 1500/2500/3500 2013-up
(with 8” touchscreen)
99-6527B
Table of Contents
A B C D
Dash Disassembly ..............................................2-3
Kit Preparation ....................................................... 4
Kit Assembly
– ISO DIN radio provision with pocket ...................... 5
– ISO DDIN radio provision ...................................... 5
Axxess Interface Installation ...........................6-15
WIRING & ANTENNA CONNECTIONS
Wiring Harness: • Axxess interface and harness included Antenna Adapter: • 40-EU55 (sold separately)
To Next Page
Need help?
General
