Metra Electronics 99-8907HG User Manual

Wiring Harness: • 70-1761 Antenna Adapter: • 40-LX11
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
Installation instructions for part 99-8907HG
• ISO DIN radio provision with pocket
• Painted two-tone silver and gloss black
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (2) Metal speed clips
• E) (2) #10 x 3/4” Phillips screws • F) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
• Panel removal tool • Phillips screwdriver
• 10 mm socket wrench and long extension
TOOLS REQUIRED
Subaru Impreza and Crosstrek 2015-up
99-8907HG
A
C
D
FE
B

Metra Electronics 99-8907HG Specifications

General

Brand	Metra Electronics
Model	99-8907HG
ISO DDIN radio provision	Yes
Wiring Harness	Not included
Antenna Adapter	Not included
Material	Plastic
Product Type	Dash Kit
Applications	Car stereo installation
Compatibility	Volvo XC60 2010-2017
Installation Type	Double DIN

Summary

Kit Features and Components

Important Safety Precautions

Provides critical safety warnings, including battery disconnection and ignition handling.

Dash Disassembly Procedures

Remove Outer Trim Panel

Lower Driver Airbag Assembly

Procedure to remove nuts and lower the driver airbag assembly.

Disconnect Climate Control Cables

Remove Lower Radio Support Bolts

Remove and Unplug Factory Radio

Procedure for detaching and disconnecting the original radio unit.

Remove Factory Climate Controls

Kit Assembly and Radio Installation

Attach Climate Controls to Trim Panel

Secure factory climate controls to the new radio trim panel using factory hardware.

Install Radio into Assembly

Connect Wiring and Test Radio

Locate harness, connect to radio, and test functionality after reconnecting battery.

Mount Radio Assembly in Dash

Secure the radio into the dash cavity using factory bolts and supplied screws.

Reassemble Dash and Trim Panel