MI 2088 Earth –Insulation Tester Introduction
4
1. Introduction
Congratulations on your purchase of the Earth - Insulation Tester and its
accessories, produced by METREL d.d. We are glad, to be able to offer high
professional test equipment, for carrying out absolute measurement of Earth
Resistances and Insulation Resistances on installations in buildings. The equipment
was designed and produced on basis of rich experiences, acquired through more-
years long period of dealing with Earth Resistance and Electric installation test
equipment.
1.1. General description
The Earth - Insulation Tester is high professional, multifunctional, portable test
instrument. It is intended for carrying out Earth Resistance, Insulation Resistance and
Continuity of Protection Conductors measurements, according to European standard
EN 61557. It can also do various other tests and measurements.
The instrument is equiped with all accessories, necessary for comfortable carrying out
the tests. It is kept in a soft carrying bag, separated from enclosed accessories.
Electronic part of the Earth - Insulation Tester is produced in SMD technology, which
demands practically no service interventions. Custom designed LCD display with
backlight offers easy to read main results as well as a wide range of subresults,
parameters and messages. Operatio is simple and clear, operater does not need to
attend any special training (except to read this Instruction Manual) to operate the
instrument.
In order, the operater to be familiar enough with measurements, covered by the Earth
– Insulation Tester (purpose of each measurement, measurement principle, limit
values etc.), it is advisable to read the enclosed handbook Measurements on
electric installations in theory and practice.
Professional PC SW enables simple transfer of test results and other parameters to
PC, as well as simple and quick forming of final protocols.
To Next Page
Loading...
Need help?
General
