Metrix HI 803 User Manual

Doc# 0296-0018 • REV R (July 2017) Page 59 of 61
TTS CALIBRATION PROCEDURE CHECK-OFF SHEET
TTS S/N __________________________________________________ DATE _______________
TECHNICIAN ___________________________________________________________________
List all of the test equipment and their “TE” numbers used during this procedure:
Synthesizer ____________________________________ TE# ____________________________
DMM _________________________________________ TE# ___________________________
Aer each test is completed successfully, record the appropriate correcon factor as shown on the TTS
display.
Step Step
8 ______________________ 47 _____________________
12 ____________________ 49 _____________________
_
17 _____________________ 51 _____________________
21 _____________________
26 _____________________
27 _____________________
28 _____________________
29 _____________________
30 _____________________
33 _____________________
35 _____________________
37 _____________________
39 _____________________
41 _____________________
43 _____________________
45 _____________________
Aach the TTS BIT MODE print-out to CHECK-OFF Sheet.

Metrix HI 803 Specifications

General

Brand	Metrix
Model	HI 803
Category	Test Equipment
Language	English