MX 20
22
IEC 364
NF-C 15 100 / NF-C 18510 / NF-C 18530
WARNING
Hazardous voltages are present in this electrical
equipment during operation.
Non observance of the safety instructions can result in
severe personal injury or property damage.
Only qualified personnel should work on or around this
equipment after becoming thoroughly familiar
with all warnings, safety notices, and maintenance
procedures contained herein.
The successful and safe operation of this equipment is
dependant on proper handling, installation,
operation and maintenance.
Qualified person :
A "qualified person" is one who is familiar with the instal-
lation, construction and operation of the equipment and
the hazards involved.
In addition, he has the following qualifications :
· He is trained and authorized to energize, de-energize,
clear, ground and tag circuits and equipment in accordance
with established practices.
· He is trained in the proper care and use of protective
equipment in accordance with established safety practices.
· He is trained in rendering first aid.
To Next Page
Loading...
