MX 20
30
RANGINGRANGING
RANGINGRANGING
RANGING
· In voltage and resistance measurements, the multimeter normally
operates in automatic ranging mode; an audible signal is heard
every time the range increases. Ranges can be selected manually
by pressing the MAN RANGE/AUTO RANGE key.
· Pressing the key once fixes the current range (manual mode).
Each brief touch of the key increments the range, and if the key is
held down for more than two seconds, the multimeter returns to
automatic ranging mode.
2.3 - ACCESSORIES2.3 - ACCESSORIES
2.3 - ACCESSORIES2.3 - ACCESSORIES
2.3 - ACCESSORIES
Supplied with the multimeterSupplied with the multimeter
Supplied with the multimeterSupplied with the multimeter
Supplied with the multimeter
One set of test leads and safety prods AG0475
Two 1.5 R6 size batteries AL0020
One 10 A fuse, 6.3x32mm, 50kA/600V AT0084
One 0.63 A fuse, 5 x 20 mm, fast-blow, 1.5kA/250V AT0047
One Instruction Manual IM0822
OptionalOptional
OptionalOptional
Optional
Probes :
HT0203 EHT 3 kV AC/DC
HT0212 EHT 30 kV DC
HT0208 RF 100 kHz to 750 MHz
HA0902 TV (HT transient suppressor)
HA1159 Thermometer, 1 mV/°C, -50°C to +150°C
HK0210 Type K thermocouple, 1mV/°C, general purpose
and surface type, -25°C to + 350°C.
HA1237 Optical tachometer, 100 rpm to 60000 rpm
To Next Page
Loading...
Need help?
General
