Metrohm 803 Ti Stand User Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Overview of the instrument
803 Ti Stand
￭￭￭￭￭￭￭￭
5
2 Overview of the instrument
1
2
3
4
5
Figure 1 Front 803 Ti Stand
1
Bore hole
For support rod (6.2016.070), diameter 10
mm, length 40 mm
2
Housing
With built-in pump and magnetic stirrer
3
LED function display
Lights up, when the stirrer is switched on.
4
Key
Pressing the key aspirates air out of the aspi-
ration bottle. The vacuum in the suction bot-
tle suctions the liquid out of the KF titration
cell and into the suction bottle.
5
Key
Pressing the key pumps air into the solvent
bottle. The overpressure in the solvent bottle
pushes solvent into the KF titration cell.

Metrohm 803 Ti Stand Specifications

General

Brand	Metrohm
Model	803 Ti Stand
Category	Laboratory Equipment
Language	English