Need help?Do you have a question about the Metrohm 915 KF Ti-Touch and is the answer not in the manual?
Details the 915 KF Ti-Touch as a compact titration system for volumetric Karl Fischer titration.
Outlines the supported titration and measuring modes, including KFT, Ipol, and Upol.
Lists and describes the various connectors on the instrument, such as USB, MSB, and sensor ports.
Specifies the intended application of the 915 KF Ti-Touch in analytical laboratories for Karl Fischer titration.
Explains the symbols, formatting, and warnings used throughout the documentation for clarity and safety.
Provides essential general safety precautions for operating the instrument correctly and safely.
Details electrical safety measures, including qualifications for service work and supply voltage warnings.
Offers guidance on safely making and maintaining tubing and capillary connections to prevent leaks.
Outlines necessary safety measures when working with flammable solvents and chemicals.
Information regarding the proper recycling and disposal of the instrument according to WEEE directive.
Identifies and explains the components and controls on the front panel of the 915 KF Ti-Touch.
Details the connectors, ports, and other features located on the rear panel of the instrument.
Covers initial setup steps including unpacking, checks, and selecting an appropriate location.
Provides instructions for safely connecting the external power supply unit to the instrument.
Step-by-step guide for correctly mounting the Karl Fischer titration cell onto the instrument.
Explains how to connect various peripheral devices using the Metrohm Serial Bus (MSB) interface.
Details the process for connecting supported dosing devices like the 800 Dosino and 805 Dosimat.
Instructions for connecting external stirrers or titration stands via MSB.
Guidance on how to connect a Remote Box for instrument control and automation.
General instructions and considerations for connecting devices via the USB interface.
Steps to connect a USB hub for expanding connectivity for multiple USB devices.
Information on connecting compatible printers, including required languages and paper sizes.
Details on connecting various balance models, including required adapters and cables.
Instructions for connecting a PC keyboard to facilitate text and numerical input.
Procedure for connecting a barcode reader and configuring its settings for input.
Details on connecting specific Sample Processor models for automated workflows.
Refers to a tutorial for detailed instructions on setting up the Karl Fischer titration vessel.
General information on connecting various sensors, including polarizable electrodes and temperature sensors.
Step-by-step guide for connecting a polarizable electrode to the instrument.
Instructions for connecting Pt1000 or NTC type temperature sensors to the instrument.
Information on establishing a network connection via Ethernet for data transfer and remote access.
Provides instructions for powering the instrument on and off, including important cautions.
Explains the basic principles and user interaction methods for operating the instrument.
Details how to interact with and use the touch-sensitive interface of the 915 KF Ti-Touch.
Describes the various display elements, fixed keys, and screen controls available to the user.
Explains the meaning of different status indicators shown on the instrument's display.
Guides the user on how to input text and numerical data using the editing functions.
Provides instructions for cleaning the surfaces and connectors of the instrument.
Details the 915 KF Ti-Touch as a compact titration system for volumetric Karl Fischer titration.
Outlines the supported titration and measuring modes, including KFT, Ipol, and Upol.
Lists and describes the various connectors on the instrument, such as USB, MSB, and sensor ports.
Specifies the intended application of the 915 KF Ti-Touch in analytical laboratories for Karl Fischer titration.
Explains the symbols, formatting, and warnings used throughout the documentation for clarity and safety.
Provides essential general safety precautions for operating the instrument correctly and safely.
Details electrical safety measures, including qualifications for service work and supply voltage warnings.
Offers guidance on safely making and maintaining tubing and capillary connections to prevent leaks.
Outlines necessary safety measures when working with flammable solvents and chemicals.
Information regarding the proper recycling and disposal of the instrument according to WEEE directive.
Identifies and explains the components and controls on the front panel of the 915 KF Ti-Touch.
Details the connectors, ports, and other features located on the rear panel of the instrument.
Covers initial setup steps including unpacking, checks, and selecting an appropriate location.
Provides instructions for safely connecting the external power supply unit to the instrument.
Step-by-step guide for correctly mounting the Karl Fischer titration cell onto the instrument.
Explains how to connect various peripheral devices using the Metrohm Serial Bus (MSB) interface.
Details the process for connecting supported dosing devices like the 800 Dosino and 805 Dosimat.
Instructions for connecting external stirrers or titration stands via MSB.
Guidance on how to connect a Remote Box for instrument control and automation.
General instructions and considerations for connecting devices via the USB interface.
Steps to connect a USB hub for expanding connectivity for multiple USB devices.
Information on connecting compatible printers, including required languages and paper sizes.
Details on connecting various balance models, including required adapters and cables.
Instructions for connecting a PC keyboard to facilitate text and numerical input.
Procedure for connecting a barcode reader and configuring its settings for input.
Details on connecting specific Sample Processor models for automated workflows.
Refers to a tutorial for detailed instructions on setting up the Karl Fischer titration vessel.
General information on connecting various sensors, including polarizable electrodes and temperature sensors.
Step-by-step guide for connecting a polarizable electrode to the instrument.
Instructions for connecting Pt1000 or NTC type temperature sensors to the instrument.
Information on establishing a network connection via Ethernet for data transfer and remote access.
Provides instructions for powering the instrument on and off, including important cautions.
Explains the basic principles and user interaction methods for operating the instrument.
Details how to interact with and use the touch-sensitive interface of the 915 KF Ti-Touch.
Describes the various display elements, fixed keys, and screen controls available to the user.
Explains the meaning of different status indicators shown on the instrument's display.
Guides the user on how to input text and numerical data using the editing functions.
Provides instructions for cleaning the surfaces and connectors of the instrument.
General| Type | Karl Fischer Titrator |
|---|---|
| Model | 915 KF Ti-Touch |
| Manufacturer | Metrohm |
| Titration Method | Volumetric Karl Fischer Titration |
| Display | Touchscreen |
| Connectivity | USB, Ethernet |
| Titrant Addition | Automatic |
| Dosing Rate | Adjustable |
| Sample Types | Liquids, solids, and gases |
| Titration Speed | Variable |
| Power Supply | 100-240 V AC |
| Measuring Principle | Coulometric or volumetric titration |
To Next Page