￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
32
￭￭￭￭￭￭￭￭
915 KF Ti-Touch
7 Maintenance
Maintenance
The electronic and mechanical functional groups of Metrohm instruments
can and should be checked by specialist personnel from Metrohm as part
of a regular preventive maintenance schedule. Please ask your local
Metrohm representative regarding the precise terms and conditions
involved in concluding a corresponding maintenance agreement.
For detailed information on this topic, please visit www.metrohm.com.
Cleaning
Cleaning the surfaces of the instrument
Prerequisites
￭ The instrument is disconnected from the power grid.
1
Clean the surfaces with a damp cloth.
NOTE
Water or ethanol can be used as a cleaning medium.
NOTE
The connectors at the rear of the instrument must only be cleaned
with a dry cloth.
To Next Page
Loading...
Need help?
General
