Need help?Do you have a question about the Metrohm 904 Titrando and is the answer not in the manual?
General| Model | 904 Titrando |
|---|---|
| Manufacturer | Metrohm |
| Category | Laboratory Equipment |
| Measuring range pH | 0 to 14 |
| Resolution pH | 0.001 pH |
| Resolution U | 0.1 mV |
| Resolution temperature | 0.1 °C |
| Resolution | 0.001 mL |
| Display | Touchscreen |
| Titration Technique | Potentiometric |
| Titration Modes | MET |
| Measurement Range | pH, mV |
| Measuring range U | ±2000 mV |
| Measuring range Ipol | 0 to 100 mA |
| Resolution Ipol | 0.1 µA |
| Dosing Volume | Variable, depending on the Dosino used |
| Inputs | pH, mV, temperature, Ipol, Upol |
| Outputs | USB, RS232 |
| Interface | USB |
| Power Supply | 100-240 V AC |
Overview of the Titrando system and its peripheral devices.
Details the characteristics and connectivity options of the 904 Titrando instrument.
Explains the supported titration modes, measuring modes, and dosing commands.
Provides information on symbols, conventions, and warnings used in the manual.
Covers general safety notes, electrical safety, working with liquids, and flammable substances.
Covers packaging, checks, and proper placement of the instrument.
Explains how to connect a controller, either Touch Control or PC.
Details how to connect Metrohm Serial Bus (MSB) devices like stirrers and dosing units.
Explains how to connect various USB peripheral devices to the Titrando.
Guides on connecting various sensor types to the measuring interface.
Discusses critical factors like mixing, stirring rate, and probe placement for titration.
Covers general care, cleaning, and protection of the instrument from contamination.
Lists common problems, their causes, and remedies related to LEDs, exchange units, and dosing drives.
Describes the function and connectivity of the Remote Box for controlling external devices.
Specifies parameters for potentiometry and temperature measurements.
To Next Page