Need help?Do you have a question about the Metrohm 930 Compact IC Flex and is the answer not in the manual?
General| Manufacturer | Metrohm |
|---|---|
| Category | Laboratory Equipment |
| Detection Methods | Conductivity, Amperometric, UV/VIS |
| Conductivity Detection | Yes |
| Amperometric Detection | Yes |
| UV/VIS Detection | Yes |
| Sequential Suppression | Yes |
| Pump Type | High-pressure pump |
| Temperature Control | Yes |
| Automation | Yes |
| Type | Ion Chromatograph |
| Pressure Range | up to 50 bar |
| Injection Volume | 1 to 1000 µL |
| Sample Injection | Autosampler or manual |
| Operating Temperature | 4 to 40 °C |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Eluent Preparation | Automated or manual |
General guidelines and specific warnings for safe operation.
Covers initial steps including packaging checks, location selection, and instrument setup.
Explains how to make capillary connections, including pressure screw types and dead-volume-free connections.
Covers the installation of the MSM, including rotors, adapters, and connecting pieces.
Instructions for installing the MCS, including general information and connections.
Procedures for the first-time startup, including software preparation, instrument setup, and system rinsing.
Steps for installing and rinsing the guard column and the main separation column.
Procedures for conditioning the system with eluent to achieve a stable baseline.
Covers operation, care, and maintenance recommendations for the IC system.
Notes on operating the pump and detailed procedures for its maintenance.
Addresses problems like pressure drops, baseline noise, and drifting with relevant causes and remedies.
Covers unexpected retention time changes and poor chromatogram resolution with their causes.
Addresses problems like peak spreading, splitting, and scattered measurement values.
To Next Page
