Metrohm 930 Compact IC Flex - Servicing the Inline Filter

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Operation and maintenance
930 Compact IC Flex Oven/SeS/PP (2.930.2500)
￭￭￭￭￭￭￭￭
79
Connecting the entry and exit for the high-pressure pump
1
￭ Remove the stopper from the coupling. Tighten the coupling to
the pressure screw located on the pump head inlet capillary (1).
￭ Reconnect the pump head outlet capillary to the pump head out-
let (2).
6.8 Servicing the inline filter
NOTE
You can find a video sequence for this task in the Multimedia Guide IC
Maintenance or on the Internet at http://ic-help.metrohm.com/.
Maintenance interval
The filter must be replaced at least every 3 months; it may need to be
replaced more frequently, depending on the application.
Accessories For this task, you need the following accessories:
￭ Two adjustable wrenches (6.2621.000) from the accessory kit: Vario/
Flex Basic (6.5000.000)
￭ Tweezers
￭ A new filter from the packaging (6.2821.130)