Metrohm 930 Compact IC Flex - Installing the Amperometric Detector; Connecting the Instrument to a Computer

4.15 Installing the amperometric detector
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
48
￭￭￭￭￭￭￭￭
930 Compact IC Flex Oven/SeS/PP (2.930.2500)
4.15 Installing the amperometric detector
The 930 Compact IC Flex provides enough space for one detector and
additional accessories in the detector chamber. The detector is available as
separate device and is supplied with a separate manual.
Placing the detector in the instrument
Follow the instructions in the chapter Inserting the detector in the manual
for the detector.
4.16 Connecting the instrument to a computer
NOTE
If the instrument is connected to the computer, then it must be
switched off.
Accessories
For this step, you need the following accessories:
￭ USB connection cable (6.2151.020) from the accessory kit: Vario/Flex
Basic (6.5000.000)
Connecting the USB cable
1
Insert the USB cable into the PC connection socket on the rear of the
instrument.