To Next Page

To Previous Page

8.13 Detector

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

106

￭￭￭￭￭￭￭￭

930 Compact IC Flex Oven/SeS/PP (2.930.2500)

8.13 Detector

You can find the technical specifications for the detector in the manual for

the detector.

8.14 Power connection

Required supply

voltage

100–240 V ± 10% (autosensing)

Required fre-

quency

50–60 Hz ± 3 Hz (autosensing)

Power consump-

tion

￭ 65 W for typical analysis application

￭ 25 W standby (conductivity detector to 40 °C)

Power supply unit ￭ Up to 300 W maximum, electronically monitored

￭ Internal fuse 3.15 A

8.15 Interfaces

USB

Input 1 USB upstream, type B (labeled PC for connecting to a computer)

Output 2 USB downstream, type A (labeled USB 1 and USB 2)

MSB 2 MSB 8-pin Mini DIN (female) (labeled MSB 1 and MSB 2 for Dosino,

stirrer, remote lines, etc.)

Detector 1 15-pin high-density D-sub (female) (labeled Detector)

Column recogni-

tion

for an intelligent column

Leak sensor 1 jack plug (labeled Leak Sensor)

Further connec-

tions

Auxiliary 1 15-pin DSUB (female)

Service 1 15-pin DSUB (female)

Metrohm 930 Compact IC Flex User Manual

Other manuals for Metrohm 930 Compact IC Flex