Metrohm 930 Compact IC Flex User Manual

4.12 Peristaltic pump
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
38
￭￭￭￭￭￭￭￭
930 Compact IC Flex Oven/SeS/PP (2.930.2500)
1
Prepare a tubing cartridge of the peristaltic pump for the regenera-
tion solution (see chapter 4.12.1, page 38).
2
Connect the capillary labeled rinsing solution to the exit of the pump
tubing using a pressure screw (6.2744.070).
3
Connect the PTFE capillary from the rinsing solution bottle to the inlet
of the pump tubing.
4.12 Peristaltic pump
4.12.1 Installing the peristaltic pump
Installing the pump tubing
Pump tubing can differ in terms of material, diameter and thus flow rate.
Different pump tubing is used depending on the application.
Table 2
Pump tubings
Order num-
ber
Name Material Inner diame-
ter
Use
6.1826.310 Pump tubing LFL (orange/
green), 3 stoppers
PVC (Tygon
®
) 0.38 mm Pump tubing for bromate deter-
mination using the triiodide
method.
6.1826.320 Pump tubing LFL (orange/
yellow), 3 stoppers
PVC (Tygon
®
) 0.48 mm For acceptor solutions for Inline
Dialysis and for Inline Ultrafiltra-
tion.
6.1826.330 Pump tubing LFL (orange/
white), 3 stoppers
PVC (Tygon
®
) 0.64 mm No special applications.
6.1826.340 Pump tubing LFL (black/
black), 3 stoppers
PVC (Tygon
®
) 0.76 mm For sample solution in Inline Dial-
ysis.
6.1826.360 Pump tubing LFL (white/
white), 3 stoppers
PVC (Tygon
®
) 1.02 mm For sample transfer.
6.1826.380 Pump tubing LFL (gray/
gray), 3 stoppers
PVC (Tygon
®
) 1.25 mm For Inline Dilution.

Metrohm 930 Compact IC Flex Specifications

General

Brand	Metrohm
Model	930 Compact IC Flex
Category	Laboratory Equipment
Language	English