￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Introduction
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
3
￭ MEAS
Measuring modes:
– Ipol (voltametric measurement with selectable polarization cur-
rent)
– Upol (amperometric measurement with selectable polarization
voltage)
– T (temperature measurement)
2.1.2 Connectors
The 915 KF Ti-Touch is equipped with the following connectors:
￭ Power connection
For connecting to the power grid using the power supply unit provi-
ded.
￭ Two MSB connectors (Metrohm Serial Bus)
For connecting dosing devices, one additional stirrer or a Remote Box.
￭ USB connector
For connecting peripheral devices (printer, PC keyboard, etc.), a USB
flash drive or a USB hub.
￭ Sensor connectors
One connector each for:
– Polarizable electrodes
– Temperature sensor (Pt1000 or NTC)
￭ Ethernet connector
For connecting the Ti-Touch to a network.
￭ Two connection nipples
For connecting tubing for aspirating solvent and extracting the con-
tents of the titration cell.
2.1.3 Intended use
The 915 KF Ti-Touch is designed for usage as a titrator in analytical labora-
tories. Its application field is volumetric Karl Fischer titration.
This instrument is suitable for processing chemicals and flammable sam-
ples. Therefore, the use of the instrument requires the user to have basic
knowledge and experience in handling toxic and caustic substances.
Knowledge regarding the application of fire prevention measures prescri-
bed for laboratories is also mandatory.
To Next Page
Loading...
Need help?
General
