￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Installation
915 KF Ti-Touch
￭￭￭￭￭￭￭￭
23
Figure 7 Connecting the temperature sensor
NOTE
The red plug must always be plugged into the red socket for the
purpose of shielding against disruptions.
5.8 Connecting the Ti-Touch to a network
The 915 KF Ti-Touch has a network connection (Ethernet). This can be
used to integrate your Ti-Touch in your network. You can, for example,
store data on a PC within the network or print reports on a network
printer. You will find information as to which settings are necessary for
the network connection in the Device manager chapter contained in the
more detailed manual.
To Next Page
Loading...
Need help?
General
