Metrohm 803 Ti Stand User Manual

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
803 Ti Stand
￭￭￭￭￭￭￭￭
9
Mounting the KF titration cell
1
2
4
3
6.1414.030
6.2013.010
6.1415.220
6.1903.020
Install the KF titration cell as follows:
1
Screw the 6.2013.010 clamping ring tightly to the support rod.
2
Mount the 6.1414.030 vessel lid of the KF titration cell to the sup-
port rod. Keep the locking lever pressed down until it can be released
at the desired position.
3
Fasten the 6.1415.220 (or 6.1415.250) titration vessel with a
6.1903.020 (or 6.1903.030) stirring bar inside on the vessel lid. Fold
back the holding bracket upwards while doing so. The markings on
the vessel lid and on the plastic ring must be aligned above one
another.
4

Metrohm 803 Ti Stand Specifications

General

Brand	Metrohm
Model	803 Ti Stand
Category	Laboratory Equipment
Language	English