2 Safety notes for electrical drives
and controllers
2.1 Used symbols
Information
Important information and notes.
Caution!
Nonobservance may result in severe property damages.
DANGER!
Nonobservance may result in property damages and in personal injuries.
Caution! Dangerous voltages.
The safety note indicates a possible perilous voltage.
2.2 General notes
In case of damage resulting from non-compliance with the safety notes in this manual, Metronix
Meßgeräte und Elektronik GmbH will not assume any liability.
Sound and safe operation of the servo drive controller requires proper and professional transportation,
storage, assembly and installation as well as proper operation and maintenance. Only trained and
qualified personnel may handle electrical devices:
TRAINED AND QUALIFIED PERSONNEL
in the sense of this product manual or the safety notes on the product itself are persons who are
involved in the project planning, the setup, assembly, commissioning and operation of the product as
well as all warnings and precautions as per the instructions in this manual and who are sufficiently
qualified in their field of expertise:
Education and instruction of standard specifications and accident prevention regulations, which
are necessessary in the application, and authorisation to switch devices/systems on and off and to
ground them as per the standards of safety engineering and to efficiently label them as per the job
demands.
Education and instruction as per the standards of safety engineering regarding the maintenance
and use of adequate safety equipment.
Training in first aid.
The following notes must be read prior to the initial operation of the system to prevent personal
injuries and/or property damages:
To Next Page
Loading...
Need help?
General
