This document is proprietary to Metso Corporation and its affiliated companies (“Metso”). This document is intended for the use of Metso's customers only for the purposes of the
agreement under which the document is submitted and no ownership rights are hereby transferred. No part of the document shall be used, reproduced, translated, converted,
adapted, stored in a retrieval system, communicated or transmitted by any means, for any commercial purpose, including without limitation, sale, resale, licence, rental or lease,
without the prior express written consent of Metso.
Customer understands and accepts that the information in this document is subject to any change without notice. It is the customer's responsibility to determine whether there have
been any such updates or amendments.
The document has been prepared to be used by professional and properly trained personnel, and the customer assumes full responsibility when using it. Despite the fact that every
effort has been made to ensure that the information in this document is accurate Metso does not make any representations, warranties or guarantees, express or implied, as to the
accuracy or completeness of the document. In case of any discrepancies between different language versions English version shall prevail. Metso shall not be liable in contract, tort
or in any other manner whatsoever to any person for any loss, damage, injury, liability, cost or expense of any nature, including without limitation incidental, special, direct or
consequential damages arising out of or in connection with the use of the document. Metso's liability for any errors in the document is limited to the documentary correction of errors.
Metso logo is a registered trademark of Metso Corporation.
Other product names mentioned in this document may be trademarks of their respective companies, and they are mentioned for identification purposes only.
Copyright
©
Metso 2023. All rights reserved.
Metso
Address:
PO Box 1220
FI-00101, Helsinki, Finland
Telephone: +358 20 484 100
Internet: www.metso.com
Status: Valid from product update: Original size:
A4
Customer: Project Phase: Site No:
Project Name: Customer Document ID:
Replaced by: Replaces: Language:
EN
Document Title:
Driving Instructions
Lokotrack ST2.8
Equipment No: Item No:
Original instructions Translation of the original instructions
Language: EN
Lokotrack ST2.8
Driving Instructions
2 (38) Copyright
©
Metso 2023. All rights reserved.
Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision:
0
Metso Document ID:
D100014842
To Next Page
Loading...
Need help?
General
