Metso Lokotrack ST2.8 User Manual

1.12.9 Starting the engine with jump starter.......................................................................29
1.12.10 Checking the fuel level..........................................................................................30
1.12.11 Handling alarms.................................................................................................... 30
1.12.12 Handling the 'A17: Remote stop active' alarm...................................................... 33
1.12.13 Handling the emergency stop alarm..................................................................... 33
1.12.14 Correcting too large inclination angle of the machine........................................... 33
1.12.15 Checking the hydraulic oil level and possible leaks.............................................. 34
1.12.16 Opening the hydraulic shut-off valve.....................................................................35
1.12.17 Recovering from too high hydraulic oil temperature..............................................35
1.12.18 Checking if manual controls are active................................................................. 36
1.12.19 Checking if process in running..............................................................................37
Lokotrack ST2.8
Driving Instructions
4 (38) Copyright
©
Metso 2023. All rights reserved.
Project ID: Plant Code: Plant Unit Code: Document Type: Running No: Revision:
0
Metso Document ID:
D100014842

Metso Lokotrack ST2.8 Specifications

General

Brand	Metso
Model	Lokotrack ST2.8
Category	Industrial Equipment
Language	English