EN 140588-2_N NORDBERG C SERIES INSTRUCTION MANUAL 2-1
SAFETY CHAPTER 2
2.1 GENERAL
The instructions of the safety guide, these safety
instructions and other manuals and safety labels for
the equipment must be read, understood and used
by each person who works with this equipment.
The following symbol is used in this manual and on
the machine to call attention to instructions, which
will help prevent machine related injuries.
When you see this symbol on your machine or in
this manual, be alert to the potential for personal
injury.
Figure 2.1 Alert Symbol
This manual uses the alert symbol, with words such
as DANGER, WARNING or CAUTION, to alert
you and other Crushing Plant personnel of actions
or conditions that pose a potential safety hazard,
with an attending risk of personal injury (including
death) or property damage. The machine also
displays safety signs, labels and tags at appropriate
points to show safety risks that may exist.
Figure 2.2 Danger, warning, caution signs and
their meaning
WARNING!
In addition to these unit-specific safety
instructions, the operators of this
equipment must also read the safety
guide with instructions for general
operational safety.
Sign Description
DANGER
Immediate hazards or unsafe practices
that will result in severe personal injury
or death.
WARNING
Hazards or unsafe practices that could
result in severe personal injury or death
CAUTION
Hazards or unsafe practices that could
result in minor personal injury or
equipment damage
DANGER
CAUTION
WARNING
To Next Page
Loading...
