Name: Metso Nordberg MP Series
Brand: Metso
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SECTION 3 - M. FRAME, ADJ. RING, TRAMP REL. & CLRNG JACK ASSY

3-32

MP SERIES CONE CRUSHER TECHNICAL REFERENCE MANUAL

bolts and spacers on the MP1000 and six on

the MP800. Refer to Figure 3-23.

7. Connect the elbow to the hose that runs from

the top of the adjustment ring and up

through the clamp ring. Then connect the

hose between the first cylinder and elbow.

8. Reassemble the dust shell to the adjustment

ring by aligning the matching holes and

installing the lockwashers and attaching

capscrews.

Questions and Answers:

Need help?

Do you have a question about the Metso Nordberg MP Series and is the answer not in the manual?

Metso Nordberg MP Series Specifications

General