EasyManua.ls Logo

Meyer Sound MAPP XT - User Manual

Meyer Sound MAPP XT
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Keep these important operating instructions. Check www.meyersound.com for updates.
OPERATING INSTRUCTIONS
Pull Back Rigging
Question and Answer IconNeed help?

Do you have a question about the Meyer Sound MAPP XT and is the answer not in the manual?

Summary

CHAPTER 1: INTRODUCTION

How to Use This Assembly Guide

Guide on how to read and understand the assembly instructions, including icons.

Factor of Safety Disclaimer

Important safety information on load capacities and installation responsibilities.

Center Bar Pickup Points

Explains calculation basis for MAPP and effect of center bar pickup points on load capacity.

Pull-Back Load Status

Discusses vertical pull-back load status and its pass/fail criteria.

Rig Point Spacing

Defines rig point spacing calculation relative to front of grid position.

Limitations and Disclaimer

Lists conditions under which safety analysis is invalid.

CHAPTER 2: PULL BACK RIGGING INSTRUCTIONS

Nomenclature

Defines rigging points and terms used in the instructions.

Top Grid to Pull Back Rigging Arrangement

Steps to arrange the system from top grid suspension to pull back rigging.

Assemble the Array

Steps to assemble the array into a regular top grid system.

Get the System Off the Ground

Procedures to lift the assembled array off the ground.

Transitioning: Top Grid to Pull Back Movement

Detailed steps for moving the array from top grid to pull back.

Transitioning: Top Grid to Pull Back Load

Steps for managing loads during the transition from top grid to pull back.

Transitioning From Pull Back to Top Grid Rigging

Steps for transitioning the array from pull back to top grid rigging.

Movement: Pull Back to Top Grid

Steps for moving the array from pull back to top grid configuration.

Summary

CHAPTER 1: INTRODUCTION

How to Use This Assembly Guide

Guide on how to read and understand the assembly instructions, including icons.

Factor of Safety Disclaimer

Important safety information on load capacities and installation responsibilities.

Center Bar Pickup Points

Explains calculation basis for MAPP and effect of center bar pickup points on load capacity.

Pull-Back Load Status

Discusses vertical pull-back load status and its pass/fail criteria.

Rig Point Spacing

Defines rig point spacing calculation relative to front of grid position.

Limitations and Disclaimer

Lists conditions under which safety analysis is invalid.

CHAPTER 2: PULL BACK RIGGING INSTRUCTIONS

Nomenclature

Defines rigging points and terms used in the instructions.

Top Grid to Pull Back Rigging Arrangement

Steps to arrange the system from top grid suspension to pull back rigging.

Assemble the Array

Steps to assemble the array into a regular top grid system.

Get the System Off the Ground

Procedures to lift the assembled array off the ground.

Transitioning: Top Grid to Pull Back Movement

Detailed steps for moving the array from top grid to pull back.

Transitioning: Top Grid to Pull Back Load

Steps for managing loads during the transition from top grid to pull back.

Transitioning From Pull Back to Top Grid Rigging

Steps for transitioning the array from pull back to top grid rigging.

Movement: Pull Back to Top Grid

Steps for moving the array from pull back to top grid configuration.

Meyer Sound MAPP XT Specifications

General IconGeneral
BrandMeyer Sound
ModelMAPP XT
CategorySpeaker System
LanguageEnglish

Related product manuals