CHAPTER 1: INTRODUCTION
4
Rig Point Spacing
When using Pull-Back, Rig Point Spacing values are calcu-
lated with reference to the front of grid position, which is the
Reference Point Position value for the array at its final rest-
ing configuration.
LIMITATIONS AND DISCLAIMER
The safety limit analysis provided by this program does not
apply, and may not be relied upon, if your loudspeaker sys-
tem (1) has been improperly installed or maintained, (2) the
rigging or loudspeakers of your system have been damaged
prior to installation, (3) your indicated configuration of the
system has been altered, (4) any weight has been added to
your indicated configuration, or (5) your system is in an out-
door venue and remains installed during strong wind condi-
tions. MEYER SOUND ASSUMES NO RESPONSIBILITY
FOR ANY PART OF AN INSTALLATION " ABOVE THE
HOOK" OR WHERE ANY OF THE FOREGOING LIMITA-
TIONS APPLY.
To Next Page
Loading...
Need help?
General
