3
INTRODUCTION
Available QuickFly
®
rigging accessories— including a
mounting yoke (MYA-UPM), stand adapter (MSA-UPM) and
U-bracket (MUB-UPM)— attach easily to the UPM-1P and
UPM-2P allowing them to be mounted or flown, either as a
single cabinet or in arrays. The optional RMS remote moni-
toring system module allows comprehensive monitoring of
all key system parameters on a remote RMS host PC.
NOTE: Read this entire manual carefully be-
fore configuring and deploying a UPM-1P or
UPM-2P system. In particular, pay careful attention
to the sections about safety issues.
Information and specifications are applicable as of the date
of this printing. Updates and supplementary information are
posted on the Meyer Sound website at:
http://www.meyersound.com
You may contact Meyer Sound Technical Support at:
Tel: +1 510 486.1166
Fax: +1 510 486.8356
Email: techsupport@meyersound.com
To Next Page
Loading...
Need help?
General
