MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS
SETUP Mode: ALL Default: see table below
All possible baud rates and modem configurations are displayedon the SETUP menu. The
selected baud rates and modem configurations are also shown.
Anytime the MFJ-1278B default values are loaded the baud rate and modem default profile is
loaded as well. The defaults are shown in the below table:
Modem Mode
Default Baud Rate/
Speed/ Format
P VHF Packet 1200
H HF Packet 300
V VHF Baudot RTTY 45
H HF Baudot RTTY 45
V VHF Ascii RTTY 110
H HF Ascii RTTY 110
C CW 20 WPM
C Memory Keyer 20 WPM
P Wefax/Fax 3 (120 Lines/Min.)
P SSTV 1 (8.5 Sec. format)
H Amtor/Navtex 100
M Multi-level FAX/SSTV All Formats
The terminal baud rate and modem configurations may be changed by using the SETUP
command.
SFNL ON/OFF Mode: AMTOR Default: OFF
SFNL controls whether the MFJ-1278B adds a new line character to "+?" and WRU.
To Next Page
Loading...
