MFJ Multi-mode Data Controller MFJ-1278B - MARSMODE 1- QSO Mode; MARSMODE 3- Storage Mode

MFJ-1278B MULTI-MODE BASIC OPERATION
MARSMODE 1- QSO Mode
In the MARS QSO mode the Transmit translations are as follows:
1. All carriage returns are converted to CR/CR/LF, or to LF only if preceding character
was also CR.
2. "NNNN" is sent as "NNNN" followed by 12 LTRS
3. Characters are translated as follows:
Key Press Trans. Characters
* CR
= LF
+ 12 LTRS
@ BELL
\ NULL
> FIGS
< LTRS
MARSMODE 3- Storage Mode
The MARS Storage Mode has all of the same transmit translations as the QSO mode, plus
these Receive translations:
Received Char Printed Char
CR *
LF =
BELL @
NULL \