MFJ-1278B MULTI-MODE OPERATIONAL COMMANDS
UNSHIFT ON/OFF Mode: RTTY Default: ON
In Baudot RTTY receive mode only, UNSHIFT ON forces the receiver shift to the LTRS
case whenever the Baudot SPACE character is received. This helps in many situations in
reducing garbling when conditions are not good.
Some stations, particularly those transmitting weather information and other strings of
numeric text, are not compatible with unshift on space (USOS). When receiving those
stations, UNSHIFT should be turned OFF.
URepeats nn Mode: Pactor Default: 1
Parameters:
nn = 1<=nn<=7
The UREPEATS parameter specifies how many retransmissions to perform for each FEC
data packet sent.
For example UREPEATS + 1 causes each FEC packet to be sent two times.
USERS n Mode: Packet Default: 1
Parameters:
n = 0 - 10, specifying the number of active connections that may be established to the MFJ-
1278B by other TNCs.
USERS affects only the manner in which incoming connect requests are handled, and has no
effect on the number or handling of connections you may initiate with this MFJ- 1278B.
For example,
USERS 0 Allows incoming connections on any free stream
USERS 1 Allows incoming connections on stream A only
USERS 2 Allows incoming connections on streams A & B
USERS 3 Allows incoming connections on streams A, B & C
and so on through USERS 10.
To Next Page
Loading...
