34008097EN/AB - Page 3
제품소개 n
환 경 보 호
MGE UPS SYSTEMS 은 환경 보호 정책을 실시 하고 있습니다.
제품 디자인은 친환경 디자인(Eco-design)에 적용하고 있습니다..
Substances
This product does not contain CFCs, HCFCs or asbestos.
Packing
To improve waste treatment and facilitate recycling, separate the various packing components.
◗ The cardboard we use comprises over 50% of recycled cardboard.
◗ Sacks and bags are made of polyethylene.
◗ Packing materials are recyclable and bear the appropriate identification symbol .
Follow all local regulations for the disposal of packing materials.
End of life
MGE UPS SYSTEMS will process products at the end of their service life in compliance with local regulations.
MGE UPS SYSTEMS works with companies in charge of collecting and eliminating our products at the end of their service life.
Product
The product is made up of recyclable materials.
Dismantling and destruction must take place in compliance with all local regulations concerning waste.
At the end of its service life, the product must be transported to a processing centre for electrical and electronic waste.
Battery
The product contains lead-acid batteries that must be processed according to applicable local regulations concerning
batteries.
The battery may be removed to comply with regulations and in view of correct disposal.
The
"Material Safety Data Sheets" (MSDS) for the batteries are available on our web site*.
(*) For more information or to contact the Product Environmental manager, use the
"Environmental Form" on the site:
www.mgeups.com -> About us -> Environment.
저희 MGE UPS SYSTEMS 제품을 이용해 주셔서 감사 합니다.
Pulsar 제품군은 최적의 전원 보호를 위해 디자인 되었습니다.
제품의 다양한 기능과 상세한 설명이 이 메뉴얼에 있습니다. 안전한 사용을 위해서 제품 메뉴얼을 읽고 UPS
(Uninterruptible Power System) 을 사용 하시기 바랍니다.
Before installing Pulsar, please read the booklet on the required safety instructions. Then follow the indications in this
manual.
더 자세한 사항이나 추가 옵션 제품을 원하실 때는 홈페이지 www.mgesupport.com 이나 전화를 이용해
주십시요. 전화 02)3471-5144, 5154
Material Abbreviation Symbol
number
Polyethylene terephthalate PET 01
High-density polyethylene HDPE 02
Polyvinyl chloride PVC 03
Low-density polyethylene LDPE 04
Polypropylene PP 05
Polystyrene PS 06